Springs and leaves for springs, of iron or steel — Suitable for use on motor vehicles
This HS classification covers springs and leaves for springs made of iron or steel, specifically designed for motor vehicles. Duty breakdown includes an MFN rate of 20%, VAT at 12% (applied on 11/12 of the taxable base), and PPH rates of 2.50% for API and 7.50% for NON-API. Special permits are not required for this classification. There are 19 available FTAs. Commercial imports require a licensed consignee (Importer of Record).
Duties & Taxes
Source: Indonesia INSWImport Duty
Bea Masuk (BM MFN)
Applied on the CIF value of goods. This is the base customs duty set by Indonesia's Ministry of Finance. May be reduced to 0% under a Free Trade Agreement.
Value Added Tax
Pajak Pertambahan Nilai (PPN)
Applied on the taxable base (CIF + import duty). Indonesia uses a special calculation: the tax base is adjusted to 11/12 of the import value before applying the 12% rate.
Income Tax
Pajak Penghasilan (PPH)
Advance income tax collected at import. Rate depends on whether the importer holds an API license: 2.5% with license, 7.5% without. Using an Importer of Record qualifies for the lower rate.
Import Cost Calculator
HS 73209010· Estimate your total landed cost
Select origin country and enter shipment value
Free Trade Agreement Rates for HS 73209010
The standard import duty for springs and leaves for springs, of iron or steel — suitable for use on motor vehicles is 20% (MFN rate). Under 10 active trade agreements, this product can be imported duty-free (0%) with a valid Certificate of Origin.
| Agreement | Rate |
|---|---|
| RCEP-Korea | 0% |
| ACFTA | 0% |
| AHKFTA | 0% |
| AHKFTA | 0% |
| RCEP-China | 0% |
| RCEP-Japan | 0% |
| RCEP-Japan | 0% |
| RCEP-Korea | 0% |
| AANZFTA | 0% |
| AJCEP | 0% |
| AKFTA | 0% |
| ATIGA | 0% |
| IACEPA | 0% |
| IACEPA | 0% |
| IECEPA | 0% |
| IECEPA | 0% |
| IJEPA | 0% |
| IKCEPA | 0% |
| IKCEPA | 0% |
| RCEP-ASEAN | 0% |
| RCEP-ASEAN | 0% |
| RCEP-Australia | 0% |
| RCEP-Australia | 0% |
| RCEP-China | 0% |
| AIFTA | 4% |
| IUAE-CEPA | 5.7% |
| IUAE-CEPA | 8.6% |
| ICCEPA | 16% |
| ICCEPA | 17% |
Required Customs Documents
These are the customs declaration forms applicable to this HS code for import into Indonesia.
Import Regulations
Special permits or certifications required for importing this product.
Related HS Codes in Chapter 73
Other articles of iron or steel; Articles of iron or steel wire, other
73202090Springs and leaves for springs, of iron or steel; Helical springs, other
73121099Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated; Stranded wire, ropes and cables, other
73042410Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel — Casing and tubing with a yield strength less than 80,000 psi, without threaded end
73102191Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment — Of tinplate
73065019Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel; Other, welded, of circular cross-section, of other alloy steel; Boiler tubes, other
73181910Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel — Having a shank of an external diameter not exceeding 16 mm
73069097Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel — Other, with an internal diameter more than 12.5 mm, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon
Need a consignee for this import?
Kickrate acts as your Importer of Record in Indonesia. No local company required.