Parts suitable for use solely or principally with the engines of heading 84.07 or 84.08 — Other cylinder liners
This HS classification encompasses other cylinder liners designed for engines classified under headings 84.07 or 84.08. The duty breakdown includes an MFN rate of 5%, VAT at 12% (applied on 11/12 of the taxable base), and PPH rates of 2.50% for API and 7.50% for NON-API. No special permits are required for this classification. There are 19 FTAs available. Commercial imports require a licensed consignee (Importer of Record).
Duties & Taxes
Source: Indonesia INSWImport Duty
Bea Masuk (BM MFN)
Applied on the CIF value of goods. This is the base customs duty set by Indonesia's Ministry of Finance. May be reduced to 0% under a Free Trade Agreement.
Value Added Tax
Pajak Pertambahan Nilai (PPN)
Applied on the taxable base (CIF + import duty). Indonesia uses a special calculation: the tax base is adjusted to 11/12 of the import value before applying the 12% rate.
Income Tax
Pajak Penghasilan (PPH)
Advance income tax collected at import. Rate depends on whether the importer holds an API license: 2.5% with license, 7.5% without. Using an Importer of Record qualifies for the lower rate.
Import Cost Calculator
HS 84099914· Estimate your total landed cost
Select origin country and enter shipment value
Free Trade Agreement Rates for HS 84099914
The standard import duty for parts suitable for use solely or principally with the engines of heading 84.07 or 84.08 — other cylinder liners is 5% (MFN rate). Under 7 active trade agreements, this product can be imported duty-free (0%) with a valid Certificate of Origin.
| Agreement | Rate |
|---|---|
| AANZFTA | 0% |
| ACFTA | 0% |
| AHKFTA | 0% |
| AHKFTA | 0% |
| AIFTA | 0% |
| AJCEP | 0% |
| AKFTA | 0% |
| ATIGA | 0% |
| IACEPA | 0% |
| IACEPA | 0% |
| ICCEPA | 0% |
| ICCEPA | 0% |
| IECEPA | 0% |
| IECEPA | 0% |
| IJEPA | 0% |
| IKCEPA | 0% |
| IKCEPA | 0% |
| IUAE-CEPA | 0% |
| IUAE-CEPA | 0% |
| RCEP-Korea | 1.5% |
| RCEP-ASEAN | 1.5% |
| RCEP-Australia | 1.5% |
| RCEP-China | 1.5% |
| RCEP-Japan | 1.5% |
| RCEP-Japan | 2% |
| RCEP-Australia | 2% |
| RCEP-ASEAN | 2% |
| RCEP-China | 2% |
| RCEP-Korea | 2.5% |
Required Customs Documents
These are the customs declaration forms applicable to this HS code for import into Indonesia.
Related HS Codes in Chapter 84
Machines for additive manufacturing; Parts, other
84829900Ball or roller bearings; Parts, other
84073492Spark-ignition reciprocating or rotary internal combustion piston engines — For other vehicles of heading 87.01
84022010Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super-heated water boilers — Electrically operated
84068210Steam turbines and other vapour turbines — Of an output not exceeding 5 MW
84149042Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters — For non-electrically operated machines
84099946Parts suitable for use solely or principally with the engines of heading 84.07 or 84.08 — Pistons, with an external diameter of 50 mm or more, but not exceeding 155 mm
84148029Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters; Not fitted with a filter, other
Need a consignee for this import?
Kickrate acts as your Importer of Record in Indonesia. No local company required.